finned tube exchanger
英 [fɪnd tjuːb ɪksˈtʃeɪndʒə]
美 [fɪnd tuːb ɪksˈtʃeɪndʒər]
翅片管换热器
双语例句
- Finned tube is used to product various of efficient heat exchanger devices, especially in the remaining heat using area.
翅片管用于制造各种高效率的热交换器，特别在余热利用方面大显神通。 - Experimental study on characteristics of heat transfer and air flow resistance about plate finned tube heat exchanger
套片式翅片管换热器传热与空气流动阻力性能试验研究 - Heat Transfer Performance Comparison of Wavy Finned Tube Heat Exchanger with Delta Winglets Under Different Arrays
不同排列方式下三角翼波纹翅片管换热器的换热性能比较波登管式压力温度计 - AIR SIDE HEAT TRANSFER AND FRICTION CHARACTERISTICS OF CORRUGATED FINNED TUBE HEAT EXCHANGERS Flow and heat transfer analysis of perforated fin in compact heat exchanger
波纹翅片管式换热器空气侧传热与阻力性能紧凑式换热器开孔翅片流动传热特性分析 - The influence of the tube pitch on the heat transfer and flow resistance performance of the finned tube heat exchanger
管间距对翅片管换热器热力性能的影响 - The heat tranfer and pressure drop performance of cross flow longitudinally finned tube banks heat exchanger are reported.
结果表明，纵助管束具有低流阻特性和较强的传热强化作用。 - Slot-helix finned tube heat exchanger is a new type heat exchanger, which heat transfer is greatly enhanced and is abroad used in many fields.
开槽螺旋翅片管换热器是一种新的翅片型式的换热器，具有较高的强化传热性能，其应用领域日趋广泛。 - Features of Inner Finned Tube Heat Exchanger and Analysis of Its Application in Cyclohexanone Plant
内展翅片管换热器特点及在环己酮装置中应用分析 - Using the method of weighted mean value of outside fluid temperature along with the Laplace transformation and recursive procedure, an analysis of the heat transfer and temperature fields of one pass finned tube bundle cross-flow heat exchanger has been carried out.
采用对管外流体温度进行加权平均的方法，应用Laplace变换和归纳法，对任意n排单程叉流翅片管束式换热器的换热和温度分布进行了分析。 - Experimental investigation of the heat transfer and friction characteristics of slot-helix finned tube heat exchanger Numerical study on heat transfer in a spiral fin
开槽螺旋翅片管换热器传热与流阻性能研究螺旋翅片管的换热计算 - Investigates the influence of subcooled finned tube heat exchanger on the system performance of air-source heat pump chiller experimentally.
对过冷段翅片管换热器对空气源热泵冷热水机组系统性能的影响进行试验研究。 - Effect 0f air flow direction on heat transfer and resistance performance of elliptical finned tube heat exchanger
进风角度对钢制椭圆翅片管散热器热力阻力特性的影响 - A finned tube is the key component of a finned tube heat exchanger, and the fin efficiency is one of the main parameters in designing a finned tube heat exchanger, and it also has certain applicable value in the comparison of heat exchange surface.
翅片管是翅片管换热器中的核心和关键元件，翅片效率是设计翅片管换热器过程中的主要参数之一，在换热表面的比较方面也具有一定的实用价值。 - Given in this paper are the experimental test results of the samples of rectangular steel finned elliptical tube bundles employed for the air cooled heat exchanger of a power station condenser air cooled system.
本文着重阐述了电站凝汽器空冷系统的空冷式换热器所用的矩形钢翅片椭圆管簇小样的试验研究。 - Analysis and Control of Welding Distortion in Multi-Row Packed Finned Tube Heat Exchanger Bundles During Manufacturing
多排密集翅片管管束焊接变形的分析和控制 - Calculation Method of Finned Tube Condensing Heat Exchanger for Natural Gas Water Heater
天然气热水器翅片式冷凝换热器的计算方法 - Design and Calculating programs of Finned Tube Heat Exchanger
翅片管式换热器设计计算及程序 - Frost formation on finned tube heat exchanger occurs widely.
水蒸汽在翅片管换热器壁面上结霜现象是制冷各种领域普遍存在的现象。 - Study on heat transfer enhancement of petal-shaped finned tube heat exchanger with helical baffles
螺旋隔板花瓣管换热器的传热强化研究 - Calculation of fin efficiency of an oval finned tube heat exchanger
椭圆管直翅换热器翅片效率的计算 - Irreversible loss analysis of wavy finned tube heat exchanger
管翅式换热器的不可逆损失分析 - The Wall-Temperature Working State of Finned Tube Condensing Heat Exchanger on the end of a Condensing Boiler
冷凝锅炉尾部翅片管式冷凝换热器的壁温工况 - On the basis of theory analysis of heat transfer process and major parameters in finned tube condensing heat exchanger, a method is derived for calculating heat exchange of condensing finned tube heat exchanger.
分析了冷凝翅片换热器传热过程和主要参量，提出了天然气热水器冷凝翅片换热器的设计方法。 - A forced convection finned tube exchanger model with constant blast volume was constructed and its reliability was confirmed by the performance test.
建立了恒流条件下的强制对流翅片管式换热器的结霜模型，并用实验结果验证了模型的可靠性。 - Welding sequence of ring welds and welding initial position play an important pole in welding distortion of base flame assembly of Excavator. Analysis and Control of Welding Distortion in Multi-Row Packed Finned Tube Heat Exchanger Bundles During Manufacturing
挖掘机焊接制造中，环焊缝的焊接顺序、焊接起始位置对焊接残余变形有重要影响。多排密集翅片管管束焊接变形的分析和控制 - As a heat-exchange equipment of tube-type heating-furnace in petrochemical industry, pin tube mainly is used for thermal energy convert, and its efficiency is higher than finned tube exchanger, besides tending to clear, however, production of pin tube is very complex.
钉头管是石化企业管式加热炉中的换热设备，主要用于热能的交换，比翅片管效率更高且易于外表清洁，但生产却复杂的多。 - At this point, the cooling capacity Φ, the fin surface heat transfer coefficient h, the pressure drop Δ P values and the COP of the SK-type finned tube heat exchanger along with inlet air velocity and relative humidity increases increases.
此时，SK型翅片管式换热器的制冷量Φ、翅片表面传热系数h、空气侧压降ΔP和COP值都随着入口空气流速和相对湿度的增大而增大。 - Currently, Power industry in the application of the rear heating surface is the more common helically finned tube heat exchanger, the actual operation shows that helically finned tube heat exchanger fouling significantly.
目前在动力行业尾部受热面应用的比较普遍的是螺旋翅片管换热器，实际运行表明螺旋翅片管换热器积灰明显。 - Heat exchanger is a necessary equipment in the industrial process, finned tube is core element that comprised of finned tube heat exchanger, its quality directly affect the heat exchanger performance.
换热器是工业传热过程中必不可少的设备，翅片管是组成翅片管换热器的核心元件，其质量优劣直接影响换热器的工作性能。